Storing Phone Numbers
You can store up to 20 phone numbers in the one-touch auto dial buttons
(10 numbers in UPPER memory locations, 10 numbers in LOWER
memory locations).
To store in an UPPER memory location
It is recommended that you program an emergency number in the
EMERGENCY button.
Make sure that a call is not put on hold.
1
Press (PROGRAM).
≥The MUTE indicator flashes.
2
Enter a phone number, up to
22 digits.
≥If you enter a wrong number,
press (PROGRAM) and start
again from step 1.
3
Press one of the one-touch
auto dial buttons.
≥A long beep sounds.
≥The MUTE indicator light goes
out.
≥The unit will return to the
standby mode.
≥If 3 beeps sound, the number
entered in step 2 may be over
22 digits. Press (PROGRAM)
to return to the standby mode
and start again from step 1.
≥If a pause is required for dialing, press (PAUSE) where needed. Pressing
(PAUSE) counts as one digit (p. 17).
≥When using the Dial Lock (p. 20) or Call Restriction feature (p. 21), you cannot
store a phone number in the EMERGENCY button.
14
One-Touch Dialer
Do not press any one-touch auto dial buttons before storing to prevent
misoperation.
To Next Page
Loading...
