20
“
Special Features
To cancel the dial lock
Follow steps 1 through 3 above again.
You can use the following features while the dialing buttons are locked.
≥Dialing a number you programmed into the memory of the EMERGENCY
button (p. 16)
≥Adjusting the handset and speakerphone volumes (p. 10)
≥Muting the conversation (p. 18)
≥Answering the second call by pressing (FLASH) (p. 17)
To set the dial lock
1
Press (DIAL\LOCK).
≥The MUTE indicator flashes.
2
Enter the PIN code (p. 19).
3
Press (PROGRAM).
≥A long beep sounds.
≥If a wrong PIN code is entered, 3 beeps will sound. Enter a correct PIN
code and press (PROGRAM).
≥The MUTE indicator light goes out.
≥The unit will return to the standby mode.
Dial Lock
You can prevent others from making a call to any number except the one
pre-programmed in the memory of the EMERGENCY button. Once you
locked the dialing buttons, even emergency numbers cannot be dialed.
Only incoming calls are accepted until the dial lock is canceled.
Before using this feature, we recommend
storing an emergency number in the
memory of the EMERGENCY button (p. 14).
Even if the dialing buttons are locked, the
number stored in the button can be dialed.
≥If you choose not to program emergency
numbers, but plan to use the dial lock, any
number programmed into the
EMERGENCY button can be accessed.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
