6.1 Starting Up
Installation Manual 195
PBX Environment settings
The next window displayed is the PBX Environment window.
In this window, you can select the PBX Type, Integration Mode (KX-TVM50 only), and set other
parameters essential for proper integration between the PBX and VPS. For more information,
refer to "PBX Environment" in 2.5.4 Parameters in the Programming Manual.
Note
• The VPS will set the appropriate parameters to match the default settings of the PBX you
select as the PBX Type.
Edit each parameter as needed, then click "Next". You will be asked whether you want to start
Auto Configuration.
Click "OK" to start Auto Configuration (then continue from "If Auto Configuration is started" in this
section) or "Cancel" to skip Auto Configuration (then continue from "If Auto Configuration is
skipped" later in this section).
To Next Page
Loading...
