6.1 Starting Up
196 Installation Manual
If Auto Configuration is started
Auto Configuration (available for APT/DPT Integration only) allows the PBX and VPS to
exchange information and make the setup process easier. If you cannot use Auto Configuration
or skip Auto Configuration, continue from "If Auto Configuration is skipped" later in this section.
If you start Auto Configuration, the following screen will be displayed while data is exchanged
between the PBX and VPS.
Click "Next" when the button becomes available.
Create mailboxes
The next window displayed is the Select Extensions window. Extension data retrieved from the
PBX is displayed.
Select the extensions for which you would like to create mailboxes, then click "Next".
To Next Page
Loading...
