tftp://192.168.1.1/{mac}.cfg
Replace 192.168.1.1 with your PBXware IP address or domain name and click Save to preserve
■
changes and initiate auto provisioning.
Once you click Save button your phone will reboot and send request for auto provisioning
■
configuration file to PBXware. If all settings are configured properly phone should receive the
configuration file and register to assigned extension once it boots up. To make sure everything
works fine you can dial *123 to see if you will get into the voicemail sound prompt.
Once you are able to get to voicemail prompt your phone configuration is finished and you
should be able to make and receive calls.
Retrieved from
"
http://wiki.bicomsystems.com/UAD_Panasonic_KX-HDV130_KX-UT113_KX-UT123_KX-UT133_KX
-UT136"
Disclaimers - About Bicom Systems Wiki
To Previous Page
Loading...
