Panasonic KX-UT136 - Page 5

Panasonic Configuration Guides
5/11
192.168.2.127
Figure 1-2 Identify the IP of Panasonic Phone
2. Open the web port of Panasonic phone
Figure 1-3 Open the Web Port of Panasonic Phone
3. Point your browser to the web interface of the phone: http://192.168.2.153
and enter the login credentials (default username "admin"; default password
"adminpass")
4. We need to set the phone to register with MyPBX. Click “VoIP -> Line 1" tab,
and configure as follows:
1) In the "Phone Number" & “SIP Server” section:
Figure 1-4 Number &SIP Server
 Phone number: the number of extension.
 Registrar Server Address: the IP address of MyPBX.
 Registrar Server Port: the port number to use for communication
with MyPBX. Default value:5060.
 Proxy Server Address: the IP address of MyPBX.