What to do if changes to settings, contacts, etc., were not saved on Panasonic KX-UT670 Telephone?
If your changes weren't saved, it might be because you answered a call or moved to another screen while making those changes. Try making the necessary changes again, ensuring you don't interrupt the process.
Why I cannot transfer a call on my Panasonic Telephone?
If you can't transfer a call, it could be because you are currently in a 3-party conference call. Once the conference call ends, try the transfer operation again.
Why I cannot do a blind transfer on my Panasonic Telephone?
You might be unable to perform a blind transfer because you are either in the middle of transferring a call or participating in a 3-party conference call. Cancel the current transfer or end the conference call before attempting the blind transfer again.
Why I cannot establish a 3-party conference call on my Panasonic KX-UT670 Telephone?
If you can't establish a 3-party conference call, it's likely because you are currently in the middle of transferring a call. Cancel the transfer and then try the conference call operation again.
How to fix Panasonic KX-UT670 when I cannot hear a dial tone?
If you cannot hear a dial tone on your Panasonic Telephone, first ensure the Ethernet cable is properly connected. Also, the network settings may not be correct. Another solution is to reset all equipment by shutting down your modem, router, hub, unit, and PC, then turning them back on in that order. If you still cannot access Internet Web pages using your PC, check for connection issues in your area. Confirm that each line is registered properly in the phone status, and verify the SIP server address, URLs of the configuration files, and encryption key are correct. For detailed settings, it's best to consult your network administrator or phone system dealer.
What to do if Panasonic KX-UT670 unit will not start up correctly?
If your Panasonic Telephone unit will not start up correctly, the Web user interface settings or configuration file settings may not be correct. Try resetting the unit to initialize the settings, and then reconfigure it correctly. If settings were not initialized after performing this procedure, consult your phone system dealer.
How to reset the password of Panasonic KX-UT670 Web user interface?
If you've lost the login password for the Web user interface of your Panasonic Telephone, you can reset it from the unit. This will reset passwords for both Administrator and User accounts. For security reasons, it's recommended to set new passwords immediately.
General| Speakerphone | - |
|---|---|
| Voice codecs | G.711a, G.722, G.729A |
| Mounting | Desk/Wall |
| Handset type | Wired handset |
| Product type | IP Phone |
| Product color | Black |
| Wall mountable | Yes |
| Display diagonal | 7 \ |
| Display number of colors | 262144 colors |
| Lines quantity | - lines |
| Phonebook capacity | - entries |
| Bluetooth | No |
| Headphone outputs | 2.5 |
| USB 2.0 ports quantity | 1 |
| Ethernet LAN (RJ-45) ports | 2 |
| Number of handles included | 1 pc(s) |
| Operating temperature (T-T) | 0 - 40 °C |
| Internal memory | 500 MB |
| Compatible memory cards | SD, SDHC, SDXC |
Weight and Dimensions| Depth | 180 mm |
|---|---|
| Width | 270 mm |
| Height | 220 mm |
| Weight | 1300 g |
To Next Page