80
⿎
Status request: STS
Requires the operation status of laser marker, such as ready status and error occurrence status.
• Status request
STX STS R (Check sum) Delimiter
• Response to status request
Read out with the following format:
STX STS A
[Error occurrence status] [Laser pumping status]
[Command reception status] [Marking ready status]
[Trigger status]
5-byte
(Check sum) Delimiter
Name
Data
length
[byte]
Description Remarks
Error occurrence
status
1
“0”: no error
“1”: error occurrence
Laser pumping
status
1
“0”: laser pumping OFF
“1”: laser pumping
“2”: laser pumping completed
Command
reception status
1
“0”: Shutter close or command
reception mode ON
(including while the shutter is
opened)
“1”: Shutter open
(excepting when the command
reception mode is ON)
Shutter and command reception mode (MKM
command) status is indicated.
Use this for determination of whether various
commands can be transmitted. For details,
refer to “Command Reception Condition”.
Marking ready
status
1
“0”: marking disable (ready OFF)
“1”: marking enable (ready ON)
The status of marking trigger acceptability is
indicated.
Trigger status 1
“0”: trigger OFF
“1”: Trigger ON
The status of trigger input (TRIG.IN) is
indicated when “equidistant marking” is
selected at trigger condition.
Reference
• Marking is enable when the response data is either “02110” or “02111”.
To Next Page