7. Recording Motion Pictures
184
Fine-adjust the shutter speed to reduce flickering and horizontal stripes.
• This function is available when [Exposure Mode] is set to either [S] or [M] in Creative
Video Mode.
1 Select the menu. (P55)
2 Select Shutter Speed with 2/1, and then press
[MENU/SET].
A Shutter speed
• Adjust the shutter speed while looking at the screen so that
flickering and horizontal stripes will be minimised.
• If you press and hold 2/1, the shutter speed will be
adjusted faster.
• You can also adjust the shutter speed setting on the
recording screen in increments finer than the normal
adjustment method.
You can adjust the black level, which serves as the reference for images.
1 Select the menu. (P55)
2 Rotate the rear dial or front dial to adjust the setting.
• When not adjusting the setting, select [0].
3 Press [MENU/SET].
[Synchro Scan]
> [Creative Video] > [Synchro Scan] > [ON]
• When you set [Synchro Scan] to [ON], the available shutter speed range becomes narrower.
[Master Pedestal Level]
j Side
This side creates a high
contrast image with a crisp
atmosphere.
n0 (Standard)
This is the standard setting.
i Side
This side creates a slightly
misty atmosphere.
> [Creative Video] > [Master Pedestal Level]
MENU
246.9246.9
MENU
101055
-
15
-
15
-
5
-
5
-
10
-
10 00
1515
MPL
MPLMPLMPLMPLMPLMPLMPL
+4
To Next Page
Loading...
Need help?
General
