185
7. Recording Motion Pictures
You can switch the units of shutter speed values and gain (sensitivity) values.
You can display wave forms on the recording screen.
1 Select the menu. (P55)
2 Press 3/4/2/1 to select the display position, and press [MENU/SET].
• Direct touch operation is also possible from the recording screen.
Not available in these cases:
• This function is not available in the following cases:
– When [Photo Style] is set to [V-Log L]
[SS/Gain Operation]
[SEC/ISO] Displays the shutter speed in seconds and the gain in ISO.
[ANGLE/ISO]
Displays the shutter speed in degrees and the gain in ISO.
• Available degree values (When [Synchro Scan] is set to [OFF]):
11 d to 360 d
[SEC/dB]
Displays the shutter speed in seconds and the gain in dB.
• Available gain (sensitivity) values:
AUTO or s6 dB to 30 dB (s12 dB to 30 dB when [Extended Gain Setting] is
set)
• 0 dB is equivalent to ISO 400.
• The names of the menu items below change as follows:
– [ISO Sensitivity (video)] > [Gain Setting]
– [ISO Auto Lower Limit Setting] > [Auto Gain Lower Limit Setting]
– [ISO Auto Upper Limit Setting] > [Auto Gain Upper Limit Setting]
– [Extended ISO] > [Extended Gain Setting]
[WFM/Vector Scope]
> [Creative Video] > [WFM/Vector Scope]
[WAVE] Displays waveforms as waves.
[VECTOR] Displays waveforms as vectors.
[OFF] s
MENU
To Next Page
Loading...
Need help?
General
