163
6. Stabiliser, Zoom and Flash
Applicable modes:
Adjust the flash brightness when pictures taken with the flash are over or underexposed.
1 Select the menu. (P50)
2 Press 2/1 to set the flash output and then press [MENU/SET].
• You can adjust from [j2 EV] to [i2 EV] in steps of 1/3 EV.
• Select [n0] to return to the original flash output.
Applicable modes:
Select the menu. (P50)
Settings: [ON]/[OFF]
Adjust the flash output
> [Rec] > [Flash] > [Flash Adjust.]
•[i] or [j] is displayed on the flash icon in the screen when the flash level is adjusted.
Synchronising the output of the flash to the Exposure Compensation
> [Rec] > [Flash] > [Auto Exposure Comp.]
• For details on Exposure Compensation, refer to P114.
To Next Page
Loading...
