2. Getting Started/Basic Operations
20
1
1: Slide the release lever in the
direction of the arrow.
2: Open the card/battery door.
• Always use genuine Panasonic
batteries.
• If you use other batteries, we cannot
guarantee the quality of this product.
2
Being careful about the battery
orientation, securely insert it all
the way in, and then check that it
is locked by the lever A.
To remove the battery, move the
lever A in the direction of the
arrow.
3
1: Close the card/battery door.
2: Slide the release lever in the
direction of the arrow.
Inserting the Battery
• Turn the camera off and wait for the “LUMIX” display on the monitor to clear before removing
the battery.
(Otherwise, this unit may no longer operate normally and the card itself may be damaged or
the recorded pictures may be lost.)
To Next Page
Loading...
