265
10. Using the Wi-Fi function
Sending images to AV device
You can send pictures and motion pictures to an AV device (home AV device) that
supports DLNA, such as a recorder.
1 Select the menu. (P50)
2 Select [Via Network] or [Direct], and connect. (P276)
3 Select a device you want to connect.
4 Check the send settings, and select [Set].
• To change the send setting, press [DISP.]. (P262)
A Wireless access point B Home AV device
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
[Send Images While Recording] or [Send Images Stored in the Camera] >
[AV device]
5
When [Send Images While Recording] has been selected
Take pictures. (P260)
When [Send Images Stored in the Camera] has been selected
Select the picture. (P261)
• Sending may fail depending on the operational status of the AV device. Also, sending may
take a while.
To Next Page
Loading...
