2. Getting Started/Basic Operations
44
Press [DISP.] to switch the information displayed on the
screen.
• If the information on the screen is not displayed any longer
because no operation was performed for some time, press the
[DISP.] button or touch the screen to display the information
again.
∫ About the tilt sensor display
With the tilt sensor displayed, it is easy to correct the tilt of the camera etc.
• When the tilt of the camera is little, the indicator changes to green.
[DISP.] button (Switching the displayed information)
In Recording Mode
With information
Without
information
With information
(tilt sensor
display)
Without
information (tilt
sensor display)
A Horizontal direction: Correcting tilt to the left
B Vertical direction: Correcting downward tilt
• Even after correcting the tilt, there may still be an error of approximately n1°.
• When tilted significantly upwards or downwards to record, the tilt sensor display may not be
displayed correctly, and the Direction Detection Function (P38) may not work correctly.
To Next Page
Loading...
