243
9. Using Menu Functions
DPOF “Digital Print Order Format” is a system that allows the user to select which pictures
to print, how many copies of each picture to print and whether or not to print the recording
date on the pictures when using a DPOF compatible photo printer or photo printing store.
For details, ask at your photo printing store.
• When you set [Print Set] for a group pictures, the print setting for the number of prints will be
applied to every picture in the group.
> [Playback] > [Print Set]
1 Select the picture. (P222)
2 Press 3/4 to set the number of prints, and then press [MENU/SET] to set.
• When [Multi] has been selected, repeat steps 1 and 2 for each picture.
(It is not possible to use the same setting for a multiple number of pictures.)
• [999+] is displayed on the screen, if the total number of prints you set for a group pictures
is more than 1000 pictures.
∫ Cancelling all the [Print Set] settings
Press 3/4 to select [Cancel], and then press [MENU/SET].
∫ To print the date
After setting the number of prints, set/cancel printing with the recording date by pressing
1.
• Depending on the photo printing store or the printer, the date may not be printed even if you set
to print the date. For further information, ask at your photo printing store or refer to the
operating instructions for the printer.
• The date print feature is disabled for pictures that are stamped with text.
[Print Set]
• The number of prints can be set from 0 to 999.
• Depending on the printer, the date print settings of the printer may take precedence so check
if this is the case.
Not available in these cases:
• This function is not available in the following cases:
– Motion pictures
– 4K burst files
– Images recorded with [Post Focus]
– Pictures taken with [ ]
MENU
To Next Page
Loading...
Need help?
General
Weight and Dimensions
