35
2. Getting Started/Basic Operations
To attach the lens hood (flower shape) that came with the interchangeable lenses
(H-FS35100)
Hold the lens hood with your fingers placed as
shown in the picture (A).
• Do not hold the lens hood in a way that twists or bends it.
(B)
1 Align the mark C ( ) on the lens hood with the
mark on the tip of the lens.
2 Rotate the lens hood in the direction of the
arrow until it clicks and then align the mark D
( ) on the lens hood with the mark on the tip
of the lens.
Temporarily Storing the Lens Hood
1 Turn the lens hood in the direction of the arrow to detach it.
2 Align the mark E ( ) on the lens hood with the mark on the tip of the lens.
3 Turn the lens hood in the direction of the arrow until it clicks into place.
To Next Page
Loading...
