VQT3A48
134
Recording
• Refer to P64 for details.
• Refer to P64 for details.
• LCD monitor display and viewfinder display can be switched manually by pressing [LVF/LCD].
(P16)
• The recording area indicated is a guide line.
[LVF DISP.STYLE]
[]/[]
[LCD DISP.STYLE] []/[]
[LCD INFO.DISP.]
This will set the colour of the information display screen on the
LCD monitor.
(P64)
[OFF]
[]: Black colours
[]: Grey colours
[]: Silver colours
[LVF/LCD SWITCH]
It will switch automatically to viewfinder display when an eye or
object gets near the viewfinder using an eye sensor. It will return
to LCD monitor display when it goes away.
[AUTO SWITCH]:
Enables/disables the eye sensor.
[OFF]/[ON]
[SENSITIVITY]:
This will set the sensitivity of the eye sensor.
[LOW]/[HIGH]
[ BUTTON]
Enables/disables the motion picture button.
[OFF]/[ON]
[RECAREA]
This changes the angle of view during motion picture recording
and still picture recording.
[!]
(Picture)/[ ] (Motion picture)
[REMAINING DISP.]
This will switch display between the number of recordable
pictures and available recording time.
[REMAINING SHOTS]:
This will display the number of recordable pictures for still
pictures.
[REMAINING TIME]:
This will display the available recording time for motion pictures.
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 134 ページ ２０１０年１０月１４日 木曜日 午後３時５０分
To Next Page
Loading...
