5. 4K Photo and Drive Settings
122
∫ Setting Loop Recording
The camera performs recording while deleting the data of the preceding part so that you
can continue recording while waiting for a photo opportunity, without replacing the card.
•
Once you start recording, the 4K burst file will be recorded and divided approximately every
2minutes.
Approximately the last 10 minutes (up to approximately 12 minutes) will be saved. The
preceding part will be deleted.
Select the menu. (P54)
Settings: [ON]/[OFF]
•
We recommend that you use a sufficiently charged battery or an AC adaptor (optional).
• Up to 12 hours of continuous recording is possible.
• [ ] is displayed during recording.
• The available recording time and elapsed recording time are not displayed during recording.
• [Loop Recording] is not possible when there is insufficient free space on the card.
• [Loop Recording] is available only for [ ] ([4K Burst(S/S)]).
1 Select [ ] ([4K Pre-Burst]). (P118)
A Number of recordings that can be made
• If you press the shutter button halfway, the aperture value
and shutter speed will be displayed.
2 Press the shutter button fully.
•
Recording of a 4K burst file will be performed for
approximately 1 second before and after the moment that
the shutter button is pressed.
• For information on how to select and save pictures from recorded 4K burst files, refer to P129.
• When recording with [ ] ([4K Pre-Burst]), images may not be displayed as smoothly as when
recording with the normal recording screen.
> [Rec] > [4K PHOTO] > [Loop Recording]
Recording with [4K Pre-Burst]
Recording tips
Focus and exposure
Auto Focus adjusts focus continuously, and except in Manual Exposure Mode, it
also adjusts exposure continuously.
•
In situations where you want to lock focus and exposure, such as when the subject
is not at the center, use [AF/AE LOCK]. (P109)
60
p
120012001200
AFSAFS
4K
4:3
0
To Next Page
Loading...
Need help?
General
