2. Getting Started/Basic Operations
44
Front Dial
Rotating:
Selection of items or setting of values is performed during the various settings.
Rear Dial
Rotating:
Selection of items or setting of values is performed during the various settings.
Pressing:
Operations that are the same as [MENU/SET] button, such as determine settings, etc., are
performed during the various settings.
•
This owner’s manual describe operations of the front dial/rear dial as follows:
Allows you to set the aperture, shutter speed, and other settings when in ///
modes.
¢ Pressing the rear dial enables you to set the exposure compensation.
• In [Dial Set.] in the [Custom] menu, you can change the operation methods of the front dial and
rear dial. (P46)
Front Dial/Rear Dial
e.g.: When rotating the
front dial to the left or right
e.g.: When rotating the
rear dial to the left or right
e.g.: When pressing the
rear dial
Mode dial Front dial Rear Dial
(P69) Program Shift Program Shift
¢
(P72) Aperture value Aperture value
¢
(P72) Shutter speed Shutter speed
¢
(P73) Aperture value Shutter speed
To Next Page
Loading...
