9. Using Menu Functions
222
[Monitor Display]/
[Viewfinder]
Brightness, color, or red or blue tint of the Monitor/
viewfinder is adjusted.
1 Select the settings by pressing 3/4, and
adjust with 2/1.
•
Adjusting can also be performed by rotating the rear
dial.
2 Press [MENU/SET] to set.
• It will adjust the monitor when the monitor is in use, and
the viewfinder when the viewfinder is in use.
• Some subjects may appear differently from actuality on
the monitor. However, this does not affect the recorded
pictures.
s
[Monitor Luminance]
„ [AUTO]:
The brightness is adjusted automatically depending on
how bright it is around the camera.
[MODE1]:
Make the monitor brighter.
[MODE2]:
Set the monitor to the standard brightness.
[MODE3]:
Make the monitor darker.
• Some subjects may appear differently from actuality on
the monitor. However, this does not affect the recorded
pictures.
• The monitor automatically returns to standard brightness
if no operations are performed for 30 seconds when
recording in [MODE1]. It will light up brightly again with
button or touch operation.
• When [AUTO] or [MODE1] is set, the usage time is
reduced.
• [AUTO] is only available in the Recording Mode.
• The initial setting when using the AC adaptor (optional) is
[MODE2].
s
> [Setup]
MENU
To Next Page
Loading...
