293
11. Connecting to other equipment
When using the HDMI output, you can record pictures and
motion pictures while monitoring the camera image on an
external monitor, TV or similar device.
∫ Switching the information displayed
You can change the display shown during HDMI output using
[HDMI Info Display (Rec)] (P225) in [TV Connection] on the
[Setup] menu.
•
When you perform recording during HDMI output, the [Rec Quality] setting in the [Motion
Picture] menu is applied to images. If the connected device does not support the setting, the
optimal setting for the device will be automatically selected for the HDMI output image quality.
• When the camera is connected to an external monitor or a TV that supports 4K motion
picture, if you use one of the following settings, the angle of view becomes even narrower than
normal:
– [4K/100M/30p]/[4K/100M/24p] in [Rec Quality]
– [4K Live Cropping]
• When using the Auto Focus Mode [ ] or MF assist, the screen cannot be enlarged in
windowed mode.
• Ex. Tele Conv. (motion picture) does not work (excluding Creative Motion Picture Mode).
• [Aspect Ratio] in the [Rec] menu is fixed to [16:9].
• [VGA/4M/30p] in [Rec Quality] is not available.
• Electronic sounds and electronic shutter sounds are muted.
• If you set up a Wi-Fi connection while using the HDMI output, no image will be displayed on the
camera monitor.
• The scene selection screen in Scene Guide Mode is not output through the HDMI connection.
• This function is not available in the following cases:
– During panorama picture recording
– When recording 4K photos
– When recording using [Post Focus]
The recorded pictures can be played back on a TV with an SD Memory Card
slot
•
Depending on the TV model, pictures may not be displayed on the full screen.
• The file format of the motion pictures that can be played back differs depending on the TV
model.
• In some cases, panorama pictures cannot be played back. Also, auto-scroll playback of
panorama pictures may not work.
• For cards compatible with playback, refer to the operating instructions of the TV.
Recording while monitoring camera images
[ON]:
The camera display is output as is.
[OFF]:
Only images are output.
To Next Page
Loading...
