Recording pictures (basic)
42
• When the jitter alert appears, we recommend using the flash.
• When you set to burst mode or auto bracket, only 1 picture is recorded for every
flash activated.
• The flash icon turns red when activating the flash and pressing the shutter button
halfway.
• When the flash is being charged, the status indicator and the flash icon blink red,
and you cannot take a picture even when you press the shutter button fully.
• If the battery indicator is less than [ ] or setting to the Economy mode [ ],
the LCD monitor turns off during charging the flash.
• When taking a picture with the flash, the white balance will be automatically
adjusted [except for [ ] (Daylight)], but the white balance may not be properly
adjusted when the photo flash is insufficient.
• To avoid picture noises, we recommend setting [PICT.ADJ.] to [NATURAL]. (P72)
• Refer to P63 for the ISO sensitivity.
DMC-LC80.book 42 ページ ２００４年６月１５日 火曜日 午後５時４９分
To Next Page
Loading...
