Playback (advanced)
99
¬
Suggestions/Tips
¬
• Refer to P96 when connecting to the OS except for Windows XP and Mac OS X
when setting [USB MODE] to [PTP].
• The status indicator lights during communication.
• When connecting to a PC, we recommend using the AC adaptor (optional,
DMW-AC1) as the power source.
• If the remaining battery power becomes low during communication, the power
indicator blinks and the alarm beeps. In this case, stop the communication,
because the data may be destroyed. Then turn the camera off and use the
following power source.
• New batteries
• Charged batteries
• AC adaptor (optional, DMW-AC1)
• It may take time to display the communication screen depending on the PC.
• You can only load pictures from the camera and cannot write them on the card or
delete them.
• Do not use any other USB connection cables except the supplied one.
• When there are 1000 or more pictures on the card, the pictures may not be
imported.
• When the PC recovers from the standby mode while connecting it to a camera
with USB connection cables, they may not properly communicate with each other.
DMC-LC80.book 99 ページ ２００４年６月１５日 火曜日 午後５時４９分
To Next Page
Loading...
Need help?
General
