Settings, notes
Volume: (mute) / (low) / (high) Tone: / /
Volume: (mute) / (low) / (high) Tone: / /
0 · ·
LEVEL3
· · LEVEL6
Cannot be used to adjust TV speaker volume when connected to TV.
YES/NO
Numbers cannot be reset once folder number reaches 999. In this case, save all
necessary pictures to your computer, and format the built-in memory/card. (P.73)
To reset folder number to 100:
First, format (P.73) the built-in memory or card, and reset the file numbers using NO.
RESET. Then, select ‘YES’ on the folder number reset screen.
RESET REC. SETTINGS? (YES/NO) RESET SETUP PARAMETERS? (YES/NO)
Resetting SETUP parameters causes the following to be reset: Birthdays in BABY
(P.42) and PET modes (P.44), ‘TRAVEL DATE’ (P.48), ‘WORLD TIME’ (P.49), ‘ZOOM
RESUME’ (P.20), ‘FAVORITE’ in PLAY menu (set to ‘OFF’) (P.65), ‘ROTATE DISP.’ (set
to ‘ON’) (P.66), CLIPBOARD menu (INITIAL DISP.) (set to ‘ON’) (P.60)
(Only ‘BEEP’ is reset in the SIMPLE MODE menu.)
Folder numbers and clock settings will not be reset.
NTSC
/ PAL
/
When set to , pictures will be displayed vertically long on LCD monitor when
connecting AV cable (supplied) (P.79).
OFF (use previously selected scene mode) /
AUTO
(displays scene menu)
To display scene menu when set to ‘OFF’: Press ‘MENU/SET’.
OFF /
ON
(display)
ENGLISH
/ DEUTSCH (German) / FRANÇAIS (French) / ESPAÑOL (Spanish) /
ITALIANO (Italian) / 中文 (Chinese) / 日本語 (Japanese)
Not displayed on DMC-TZ3P/DMC-TZ2P.
1
Settings also reflected in SIMPLE MODE (P.28).
2
Settings also reflected in CLIPBOARD mode (P.58).
To Next Page
Loading...
Need help?
General
