Panasonic Lumix DMC-TZ3 User Manual

38 VQT1B61
Applications
(Record)
5
Taking pictures with exposure
compensation
Corrects exposure when adequate exposure cannot be obtained (if difference between
brightness of object and background, etc). Depending on the brightness, this may not be
possible in some cases.
Display ‘EXPOSURE’
Select a value
‘0’ (no compensation)
SELECT EXIT
EXPOSURE
The compensation value is displayed on the
bottom-left of the screen. ( , etc)
Example of exposure compensation
Minus direction
Plus direction
Over-exposed
Optimum
exposure
Under-exposed
AUTO BRACKET (DMC-TZ3 only)
Takes 3 pictures in succession, changing the exposure. After exposure compensation, the
compensation value is as standard.
Display ‘AUTO BRACKET’
Press several times
Select a value
‘0’ (no compensation)
SELECT EXIT
AUTO BRACKET
Value displayed after exposure
compensation set
e.g. AUTO BRACKET with ±1EV
Cannot be used with flash or when there is remaining capacity for only 2 more
pictures.
When ‘AUTO BRACKET’ is set, is displayed on the left of the screen.
Canceled when the power is turned off.
First picture
0EV
(Standard)
Second picture
-1EV
(Darker)
Third picture
+1EV
(Brighter)

Panasonic Lumix DMC-TZ3 Specifications

General

Sensor Resolution	7.2 megapixels
Optical Zoom	10x
LCD Screen Size	3.0 inches
Image Stabilization	Optical
ISO Sensitivity	100 - 1250
Battery Type	Lithium-Ion Battery Pack
Type	Compact
Digital Zoom	4x
Shutter Speed	8 - 1/2000 sec
Dimensions	105 x 59.2 x 36.7 mm
Video Recording	848 x 480 at 30 fps
Weight	232 g
Focal Length	4.6-46 mm (28-280 mm equivalent)
Maximum Aperture	f/3.3 - f/4.9
Storage Media	SD, SDHC, MMC
Image Sensor Size	1/2.35 inch