Preparations: Ensure that you have a sufficiently-charged battery, or an AC adaptor
(DMW-AC5PP, sold separately).
Remove memory card to use pictures in built-in memory.
Adjust settings on your printer (print quality, etc) as required.
Do not use any other USB connection cables except the supplied one.
Do not disconnect the USB cable when the cable disconnection icon is displayed
(may not be displayed with some printers).
Turn off power and disconnect USB cable before inserting or removing memory cards.
If you have connected the camera without setting it to , remove the USB cable,
and set the camera to before reconnecting. (Power may need to be reset on some
printers.)
If you change to a different mode after connecting, an error message will be displayed.
Set the mode dial back to , cancel any printing, and disconnect the USB cable.
To print clipboard pictures, first copy (P.60) to the memory card.
If the battery display flashes red, cancel printing and disconnect the USB cable
(reconnect again after charging battery).
An orange ● displayed during printing indicates an error message. Check the printer.
Print may be divided into different stints if printing several pictures.
(Remaining sheets display may differ from set number.)
USB cable
(always use cable supplied)
Turn on power of both camera and printer
Set to
Connect camera to printer
Operate camera to print pictures (see right)
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty
operation.)
If using AC adaptor,
turn off camera
power before
plugging in or
removing.
Hold here
Align marks
and insert
To Next Page
Loading...
Need help?
General
