You can view pictures on a TV screen by connecting your camera to your TV with the
supplied AV cable.
Preparations: Turn off both camera and TV.
Set the TV aspect (P.22).
Note
Do not use any other AV cables except the supplied one.
You can view pictures on TVs in other countries (regions) which use the NTSC or PAL
system when you set ‘VIDEO OUT’ in SETUP menu. Even if you set ‘VIDEO OUT’ to
‘PAL’, the output signal will still be NTSC in the recording mode.
Some televisions may cut off the edges of pictures, or not display them full screen.
Pictures rotated to portrait may be blurred slightly.
Change picture mode settings on TV if aspect ratios are not displayed correctly on
widescreen or high-definition televisions.
Also consult TV operating manual.
If problems such as picture flickering occur, set ‘VIDEO OUT’ (P.22) to ‘NTSC’.
AV cable
(always use cable supplied)
Connect camera to TV
Turn on TV
Set to auxiliary input.
Turn on camera
Set to
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty
operation.)
Hold here
If your TV has an SD memory card slot, you can
view still pictures by inserting a card directly.
* Pictures may not be viewable from some
MultiMediaCards.
Yellow: To video socket
White: To audio socket
Align marks
and insert
To Next Page
Loading...
Need help?
General
