24 VQT1Z93 VQT1Z93 25
See P.18 for the setting procedure in the SETUP menu.
Using SETUP menu
(Continued)
ZOOM RESUME
Remember the zoom
ratio when turning power
off.
OFF/ON
• Cannot be set when using ‘SELF PORTRAIT’ scene
mode.
NO.RESET
Reset image file
numbers.
YES/NO
• The folder number is updated and the file number starts
from 0001.
• A folder number between 100 and 999 can be assigned.
Numbers cannot be reset once folder number reaches
999. In this case, save all necessary pictures to your
computer, and format the built-in memory/card (P.26).
• To reset folder number to 100:
First, format the built-in memory or card, and reset the file
numbers using ‘NO. RESET’. Then, select ‘YES’ on the
folder number reset screen.
• File numbers and folder numbers. (P.102, 121)
RESET
Reset to the default
settings.
RESET REC. SETTINGS?
YES/NO
RESET SETUP PARAMETERS?
YES/NO
• Information registered in ‘FACE RECOG.’ is reset if
recording settings are reset.
• Resetting SETUP parameters causes the following to be
reset:
Birthdays and names in ‘BABY’ and ‘PET’ scene modes,
‘TRAVEL DATE’, ‘WORLD TIME’, ‘ZOOM RESUME’,
‘FAVORITE’ in PLAYBACK menu (set to ‘OFF’), ‘ROTATE
DISP.’ (set to ‘ON’).
• Folder numbers and clock settings will not be reset.
• Camera movement may be audible as the lens function is
reset. This is not a fault.
USB MODE
Select communication
method for when
connecting camera to a
computer or printer with
USB connection cable.
SELECT ON CONNECTION:
Select ‘PC’ or ‘PictBridge(PTP)’ each time you connect to a
computer or PictBridge-compatible printer.
PictBridge (PTP) : Select when connecting to a
PictBridge-compatible printer
PC: Select when connecting to a computer
Item Settings, notes
VIDEO OUT
Change the video output
format when connected
to a TV, etc. (PLAYBACK
mode only).
NTSC
/PAL:
Motion pictures that were recorded in AVCHD Lite may
not be played back correctly in some cases.
• Operates when AV cable is connected.
TV ASPECT
Change the aspect ratio
when connected to a TV,
etc. (PLAYBACK mode
only).
/
• When set to , pictures will be displayed vertically long
on LCD monitor. (Operates when AV cable is connected.)
HDMI MODE
Set the output resolution
when connected to a
high-definition TV with
an HDMI mini cable
(optional). (P.108)
AUTO: The output resolution is automatically
determined based on information from the
connected TV.
1080i: Outputs 1080 effective scanning lines in
interlaced format.
720p: Outputs 720 effective scanning lines in
progressive format.
576p
1
/480p
2
: Outputs 576 (or 480) effective scanning
lines in progressive format.
1
When the video out is set to ‘PAL’
2
When the video out is set to ‘NTSC’
Interlaced and Progressive Formats
I
n ‘i’ = interlaced format (interlaced scanning), half of the
effective scanning lines are displayed alternately every 1/50
second. In ‘p’ = progressive format (progressive scanning),
high-density video signals are sent simultaneously for all
effective scanning lines every 1/50 second.
The HDMI socket of this camera supports ‘1080i’ high
definition video output.
To enjoy progressive video or high definition video, a TV
compatible with these formats is required.
• Even if ‘1080i’ is set, the motion picture is output at 720p
during playback.
• If no video appears on the TV even though ‘AUTO’ is set,
try switching to ‘1080i’, ‘720p’, or ‘576p’ (‘480p’) to adjust
to a video format that can be displayed on your TV. (See
the manual for your TV.)
• This is activated when an HDMI mini cable (optional) is
connected.
• For further details, see P.108.
Item Settings, notes
The ‘HDMI MODE’ menu item is not available in the DMC-TZ6/DMC-TZ65.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
