6. Drive/Shutter/Image Stabilizer – Recording with Time Lapse Shot
217
2
Set [Mode] to [Time Lapse Shot].
≥ [ ] [ ] [Time Lapse/Animation] [Mode] [Time
Lapse Shot]
3
Set the recording settings.
[Mode]
Switches between Time Lapse Shot and Stop Motion Animation.
[Shooting Interval Setting]
[ON]: Sets the interval before the next recording takes place.
[OFF]: Takes pictures without leaving recording intervals.
[Start Time]
[Now]: Starts recording when the shutter button is pressed fully.
[Start Time Set]: Starts recording at the set time.
[Image Count]/[Shooting Interval]
Sets the number of pictures and the recording interval to be taken.
• [Shooting Interval] is not displayed when [Shooting Interval Setting] is set to
[OFF].
[Exposure Leveling]
Adjusts the exposure automatically to prevent large changes in brightness
between adjacent frames.
To Next Page
Loading...
