6. Drive/Shutter/Image Stabilizer – Image Stabilizer
246
Image Stabilizer Settings
Set the image stabilizer operation to match the recording situation.
[ ] [ ] Select [Image Stabilizer]
[Operation
Mode]
Sets the stabilization movement (blur) to match the recording
method (normal, panning). ([Operation Mode]: 247)
[E-Stabilization
(Video)]
Camera shake during video recording is corrected along the
vertical, horizontal, roll, pitch, and yaw axes through the
combined use of the in-lens, in-body, and electronic image
stabilizers. (5-Axis Hybrid Image Stabilizer)
• The [ ] on the recording screen changes to [ ] while
[E-Stabilization (Video)] is functioning.
• The angle of view may become narrower if set to [ON].
[Boost I.S.
(Video)]
Increases the effectiveness of the image stabilizer during video
recording.
This effect can help provide a stable composition when you want
to perform recording from a fixed perspective. ([Boost I.S.
(Video)]: 248)
[Anamorphic
(Video)]
You can switch to an image stabilizer that suits anamorphic
recording. ([Anamorphic (Video)]: 248)
[Lens
Information]
When using a lens that does not have a communication function
with the camera, register the lens information in the camera.
([Lens Information]: 249)
To Next Page
Loading...
