10. Recording Videos – Recording Videos
329
• If an operation such as a zoom or button operation is performed during video
recording, that operation sound may be recorded.
• The lens operation sound (AF and image stabilizer) may be recorded to video.
• If the operation sound of pressing the video rec. button or sub video rec. button to
end recording bothers you, try the following:
– Record the video about 3 seconds longer, and then divide the last part of the
video using [Video Divide] in the [Playback] ([Edit Image]) menu.
– Use the Shutter Remote Control (DMW-RS2: optional) for recording.
• Depending on the type of card, the card access indication may appear for a while
after video recording. This is not a malfunction.
• Even when playback is performed on a supported device, situations may occur
where image or sound quality is poor, recording information is not displayed
correctly, or playback is not possible, for example.
If you experience any of these, play them back on the camera.
• If the camera temperature rises, [ ] may be displayed and recording may stop.
Wait until the camera cools down.
• Video recording is not possible while you are using the following functions:
– [Time Lapse Shot]
– [Stop Motion Animation]
– [Rough Monochrome]/[Silky Monochrome]/[Soft Focus]/[Star Filter]/[Sunshine]
([Filter Settings])
– [Post-Focus]
• You can switch the recording screen display to suit video recording just as with
the [ ] mode:
[]  [ ]  [Video-Priority Display] ([Video-Priority Display]: 577)
• You can display a red frame on the recording screen that indicates that video is
being recorded:
[]  [ ]  [Red REC Frame Indicator] ([Red REC Frame Indicator]:
578)
To Next Page
Loading...
Need help?
General
