10. Recording Videos – [Loop Recording (video)]
413
3
Set [Loop Recording (video)].
≥ [ ] [ ] [Loop Recording (video)] [ON]
•
[ ] is displayed on the recording screen.
• When the recording fills the card to capacity, loop recording starts and video
recording time is no longer displayed.
• Make sure the camera does not turn off during recording.
• Loop recording cannot start if there is insufficient available capacity on the card.
• When the recording time exceeds 12 hours, recording continues with data being
deleted in order from the point where recording started.
• When the following functions are being used, [Loop Recording (video)] is not
available:
– [Rec Quality] with a bit rate of 400 Mbps
– [Variable Frame Rate]
– [Live Cropping]
To Next Page
Loading...
