15. Wi-Fi/Bluetooth – [Wi-Fi Setup] Menu
675
[Device Name]
You can change the name (SSID) of the camera.
• To change the SSID name, press [DISP.] and enter the new SSID name.
How to enter characters (Entering Characters: 609)
• A maximum of 32 characters can be entered.
[Wi-Fi Function Lock]
To prevent incorrect operation and use of the Wi-Fi function by a third party and
to protect personal information in the camera and included with images, protect
the Wi-Fi function with a password.
[Setup]: Enter any 4-digit numbers as the password.
• How to enter characters (Entering Characters: 609)
[Cancel]: Cancel the password.
• Once a password is set, you are required to enter it each time you use the
Wi-Fi function.
• If you forget your password, you can use [Reset] in the [Setup] ([Setting])
menu to reset the network settings and thereby reset the password.
[Network Address]
Displays the MAC address and IP address of the camera.
To Next Page
Loading...
