Panasonic MBDJT2207 - Page 32

LIQI
Page 13
Pr5.10 Sequence at alarm
Range Default Unit
0 – 7 0 -
Pr5.11 Torque setup for quick stop
Range Default Unit
0 – 500 0 %
Pr5.12 Over-load level setup
Range Default Unit
0 – 500 0 %
Pr5.13 Over-speed level setup
Range Default Unit
0 – 20000 1 r/min
Pr5.14 Motor working range setup
Range Default Unit
0 – 1000 10
Pr5.15 I/F reading filter
Range Default Unit
0 – 3 0 -
Pr5.16 Alarm clear input setup
Range Default Unit
0 – 1 1 -
Pr5.17 Counter clear input mode
Range Default Unit
0 – 4 3 -
Pr5.18
Range Default Unit
0 – 1 1 -
Pr5.19
Range Default Unit
0 – 4 0 -
Pr5.20 Position unit selection
Range Default Unit
0 – 1 0 -
* for more detail please refer Panasonic A5 manual
0.1 Revo.
Invalidation of command pulse inhibit
input
Command pulse inhibit input reading
setup