Panasonic MBDL*25 Series - MBDLN & MCDLN Series Specifications

No. SX-DSV03015 - 64 -
Motor Business Unit, Panasonic Corporation
Model MBDLN21SE MBDLN25SE MCDLN31SE MCDLN35SE
Power supply input
Single phase
100 V
Single phase/
3 phase 200 V
Single phase
100 V
Single phase/
3 phase 200 V
Maximum current rating 12 A 12 A 22 A 22 A
Rotary encoder feedback signal Resolution: 8388608 P/r Resolution: 8388608 P/r Resolution: 8388608 P/r Resolution: 8388608 P/r
Regenerative discharge resistor Externally connected Externally connected Built-in Built-in
Auto gain tuning function Provided Provided Provided Provided
Dynamic brake function Provided Provided Provided Provided
Absolute system Available
NOTE)
Available
NOTE)
Available
NOTE)
Available
NOTE)
Ambient temperature main power
supply cable
0 – 55 °C 0 – 55 °C 0 – 55 °C 0 – 55 °C
Control power cable HVSF 0.75 mm
2
HVSF 0.75 mm
2
HVSF 0.75 mm
2
HVSF 0.75 mm
2
AWG18 AWG18 AWG18 AWG18
Main power supply cable
HVSF
0.75 - 2.0 mm
2
HVSF
0.75 - 2.0 mm
2
HVSF
0.75 - 2.0 mm
2
HVSF
0.75 - 2.0 mm
2
AWG14 - 18 AWG14 - 18 AWG14 - 18 AWG14 - 18
Ground cable HVSF 2.0 mm
2
HVSF 2.0 mm
2
HVSF 2.0 mm
2
HVSF 2.0 mm
2
AWG14 AWG14 AWG14 AWG14
Motor cable
HVSF
0.75 - 2.0 mm
2
HVSF
0.75 - 2.0 mm
2
HVSF
0. 5 - 2.0 mm
2
HVSF
0.75 - 2.0 mm
2
AWG14 - 18 AWG14 - 18 AWG14 - 18 AWG14 - 18
Inrush current
(Main power supply) (*1)
Max. 7 A Max. 14 A Max. 15 A Max. 29 A
Inrush current
(Control power supply) (*1)
Max. 7 A Max. 14 A Max. 7 A Max. 14 A
Weight Approx 1.0 kg Approx 1.0 kg Approx 1.6 kg Approx 1.6 kg
Dimensions Size B Size B Size C Size C
(*1) Current values were calculated on the basis of the power supply input described above, assuming a voltage of
100 V or 200 V.
(Note) The absolute encoder backup battery is externally connected.
<Caution>
The lithium-metal battery is used as a backup battery.
There are restrictions for transportation of the lithium-metal batteries by an international transport rule
of dangerous goods etc.
Please inquire in detail through the purchase shop.