9
ENGLISH
●To change the sensor sensitivity if you are concerned that the lamp
(red) is on too much, refer to “Changing the Settings” (P. 11).
The clean lamp (red) flashes to let you know it has found dirt you can’t
see.
(It detects very fine house dust, even pollen)
The clean lamp notifies you by lighting up!
■
Clean sensor
(Lighting)
Red
(Flashing)
Clean lamp
Lights up (blue)
There is enough battery power. You can vacuum.
Flashing (blue)
The battery power is low. Charge it. (P. 6)
●
If the battery runs out during operation, the over-discharge
prevention device will automatically stop the battery.
Note
(Flashing
repidly)
(Lighting)
Clean A lot of dust
Red
Red
Blue
The battery status indicator lamp lights up to let you know!
It indicates the remaining battery level while you are vacuuming.
To Next Page
Loading...
