8
3
Charge the battery after use.
(P. 6)
1
To start it up
The suction power is automatically adjusted in accordance
with the amount of debris on the cleaning surface.
■To change the strength
AUTO : Normal vacuuming
HIGH : To vacuum with high suction power
LONG :
Long running
(The suction power is weaker than
"AUTO"
The operating mode changes
each time the button is pressed.
HIGH LONG AUTO
The floor nozzle brushes are rotating
(The rotating cannot be stopped)
Vacuuming
●Do not use force on the nozzle, and move it lightly and slowly along tatami mats and wood flooring.
Move it back and forth on carpets. Debris can easily be taken up by pulling the nozzle towards yourself.
(When vacuuming soft and easy to scratch floors such as cedar, cypress and vinyl floors, etc. and when floor
waxes and polishing floor detergents are being used on them, the floors might get scratched up.)
Request
Press
(Operation starts in AUTO mode)
2
To shut it off
Press
To Next Page
Loading...
