Panasonic MicroClear TK-CS200 - Optional Accessories and Specifications

English
Optional Accessories
Specications
Obtain all optional accessories from your dealer.
For details on how they are used, refer to the accompanying instructions.
Replacement cartridge
Model No: TK-CS200C
Large-diameter Faucet Fitting
(inside diameter 32.5 mm)
Model No : WTK7205X7378
y
For faucets whose end diameter is 24 - 32 mm
Consumables For use with large faucet
Mark position of the manufacturing number
Main materials
Main unit ABS resin
Bypass selector
ABS resin
Hose
Vinyl chloride
Main unit
Dimensions About 133(W) × 145(D) × 251(H) mm
Weight
About 1.0 k
g
(about 2.6 k
g
when full of water)
Temperature of water used by Water Purier Under 35 °C (under 80 °C for bypass selector)
The lowest applicable dynamic water pressure 40 kPa
Pressure of water used by Water Purier (dynamic pressure) 40 kPa to 350 kPa
Usable water service pressure (static pressure) 40 kPa to 750 kPa
Filtering capacity 6.0 L/min. [at 100 kPa water pressure]
Cartridge Installed In the unit TK-CS200C
Purication capacity
Free residual chlorine 12 000 L (*1)
Turbidity 12 000 L (*2)
Removable substances Iron (particulate form) Can be removed (*3)
Guide for time to replace cartridge About 1 year (*4)
Filter material Non-woven fabric, activated carbon
Components which cannot be ltered out
Iron dissolved in water, heavy metals (silver, copper,
etc.), salt (seawater)
y
All gures given are for a water temperature of 20 °C.
y
This product cannot convert hard water into soft water.
(*1) This value is for a removal rate of 80 % based on JIS S 3201 tests
(*2) This value is for a ltration ow volume of 50 % based on JIS S 3201 tests
(*3) This substance is for a removal rate of 80 % based on specication standard tests (JWPAS B
standards) stipulated by the Japan Water Purier Association (JWPA)
Note that it is not stipulated as part of purication capacity.
(*4)
This period applies when 30 liters of water are used a day. If 60 liters are used a day, the cartridge
usage limit will be approximately 1/2. The period may also be signicantly less depending on the
amount of water used and on its quality and pressure.
The manufacturing number is marked on this location.
QR
code
E.g.: 2 3 0 4 0 1
Day : two digits
Month : two digits
Year : last two digits of the year
EN19
TK-CS200_01_EN.indd 18TK-CS200_01_EN.indd 18 2022/12/28 10:52:022022/12/28 10:52:02