34 - Maintenance
Maintenance
Reconnect the water-supply hose.8.
Tighten the plastic joint firmly.
Turn on the tap, then check for leaks.9.
Preventing a frozen
water-supply hose
If the appliance is delivered in freezing
weather conditions, after setting up, leave
it at room temperature for 24 hours before
using. This will ensure that the
water-supply hose does not get clogged up
with ice.
If your water-supply hose freezes, perform
the following procedures:
Wrap warm towels around the joints 1.
of the water-supply hose.
Add 2 to 3 litres of warm water to the 2.
drum.
Run the Drain programme. (See page 3.
20.)
Joints
Tap
about
50 °C
Water-supply hose
To Next Page
Loading...
