Panasonic NA-148VS4 - Water Drain Hose; Connecting To The Power Supply

Installation Instructions - 37
Connecting Hoses and Power Supply
Leak-proof System
Theapplianceisinstalledwiththe
systemthatisdesignedtopreventwater
leaks.Thesystemincludesthefollowing
components.
1)Leaksensor
Thissensorwillceaseoperationof
theapplianceifitdetectsanyleaks.
Itislocatedonthebaseplateofthe
appliance.Ifaleakhasbeendetected,
anerrordisplaystartingwithH,for
example,H01,willappear.Inthatcase,
contactyourlocalCustomerService
Centre.
2)Overflowdetection
Ifwaterintheapplianceincreasesto
acertainlevel,thisfunctionstopsthe
watersupplyandactivatesthedrain
pump.
Water drain hose
Draining to a sink or wash-basin
Elbow
Draining to a drain hose
CAUTION
- Do NOT twist, pull out or bend the
drain hose.
- Secure the water drain hose so
that it will not come out of the
basin.
- Do NOT block the drain outlet of
the basin. Make sure that drainage
into the drain is sufficient.
- Do NOT let the tip of the water
drain hose dip into the drained
water.
Thiscancausewatertoflowback
intotheappliance.
Connecting to the power
supply
Nameplate
CAUTION
The name plate indicates the rated
power that the appliance needs.
Make sure that the power supply
specifications in your residence
match the information mentioned
here.
NA-140_148VS4_AUNZ_EN_20140213.indb 37 2014/02/13 13:35:43