10 1111
Before Using
Control Panel
Controls
3 4 25 6 7 8 19
Display
This illustration shows all indications for explanation purposes.
4 5 76
1
2
3
1. Power buttons [On] [Off]
2. Programme selection dial
Use this dial to choose a
programme suitable for the
laundry. ( P. 18)
3. Display ( P. 11)
4. Start/Pause button [Start/Pause]
To start or pause the operation.
5. Temperature button [
°C]
For selecting the water
temperature. ( P. 24)
(Cold) – 90 (90 °C)
6. Spin speed button [
r/min]
For selecting the spin speed.
( P. 25)
7. Time button [
Time]
For presetting the time at which
the wash is to nish. ( P. 25)
8. Optional function buttons
Use the buttons when washing
with any of the optional functions
or when setting the Child Lock.
(P. 28)
z : Child Lock
Press and hold “Mode” for at least 5
seconds to lock the door and other
buttons.
9. ECONAVI lamp
Lights up or ashes while the
“AutoCare” programme runs.
(P. 23)
NOTE
zTo turn the power off and back
on, press “Off” and make sure the
display has gone off, before turning
back on.
For about
3 seconds
Goes off
zIf you do not press “Start/Pause”
within 10 minutes of powering on
the unit, the appliance automatically
switches itself off.
1. Lock
: During operation
The door is locked.
: When the child lock is
activated
The door and buttons are all
locked.
2. Process
Each indicator ashes to show the
current process, and goes off when
the process nishes.
wash
rinse
spin
drain
3. Optional functions
Selected optional functions are
displayed. ( P. 26, 27)
4. Temperature
5. Spin speed
6. Timer
7. Remaining time
This indicator shows the
approximate time until the
operation nishes.
Error display
An error is displayed if the
appliance malfunctions. ( P. 36)
(e.g. U11)
Touch operation
zOperation buttons are capacitive
(Except for the power buttons).
Touch the buttons directly with
your bare ngers.
zWhen a towel containing water or
detergent touches an operation
button, the appliance may
malfunction.
To Next Page
Loading...
