Panasonic NA-148XR1 - Washing Basic Method; Adding Optional Functions

14 1515
Washing
Washing
 Preparing
zSort the laundry and put it into the
drum. (P. 9)
zAdd the detergent. (P. 12)
1
Turn on the power.
2
Select a programme.
( P. 18, 19)
The required time is displayed.
 Changing settings
 Using optional functions
3
Start operation.
zWeighing (about 30 seconds)
Some programmes do
not weigh the laundry.
(P. 18, 19)
(Display of
weighing)
.............................
u
zRequired time display
(recalculated)
(e.g.)
................
u
Operation nishes.
(The buzzer sounds and the door
lock is released.)
NOTE
zColours can run between clothes,
so remove coloured laundry soon
after the programme nishes.
3
2 1
Changing settings
Using optional functions
Changing settings
After selecting a programme, you
can change the following settings.
Temperature ( P. 24)
Spin speed ( P. 25)
Timer ( P. 25)
Using optional functions
After selecting a programme, you
can add the following optional
functions.
Prewash ( P. 27)
Extra Rinse ( P. 27)
Easy Iron ( P. 27)
Speed/Eco ( P. 27)
Mode ( P. 26)
(Select and run the wash,
rinse or spin process)
NOTE
zThe range of settings you
can change and the optional
functions you can add vary
depending on the programme.
( P. 20, 21)
NOTE
zDo not get laundry caught in the
door.
It can cause damage to the door
seal.
zDo not put too much laundry into
the drum.
It can cause excessive vibration or
damage to the appliance.
 To open the door during
operation
(The door is locked during
operation)
Press “Pause”.
(The lock is released
with a click)
zDuring spinning process, it may
take about 1 minute for the drum to
stop rotating.
Basic Method