Panasonic NA-F100A2

7. WASHING
2
3
Timer preset
1
1
After loading laundry
Turn the power on.
●
The Normal program is selected when the
power is turned on.
2
Select a program.
Press the button repeatedly until
the desired program lights up.
■
Timer preset
3
Start.
The pulsator moves without
water and measures the amount
of laundry (approx. 5 seconds).
Water amount indication
(approx. 5 seconds)
Remaining time indication
●
To check the water amount
→
Press “Water Level”.
4
According to the water amount indication
Put in detergent.
●
Approx. 20 seconds after the water amount
is displayed, water supply begins.
5
Close the lid.
Operation ends with beeps.
Set how many hours later to fi nish
operation. (P. 9)
●
2 minutes after start-up, all indications except
turn off.
●
To confi rm after the timer has been set, press
.
●
To cancel or change, press .
●
The hours that can be set differ depending on
the program.
Fragrance
Use this program to add a particularly large
amount of fabric softener for nice scent and
softness.
When the Fragrance program is
selected
●
The buzzer sounds before the final rinse and
operation is paused.
●
Put the desired amount of fabric softener which
has been diluted with water directly into the tub.
●
Operation will resume if the lid is left closed for
more than 1 hour.
●
The Fragrance program cannot be selected when
Child Lock (P. 13) is set.
Preparation:
●
Check if the washing machine is properly installed.
●
Turn on the water faucet.
●
You can change the water level until the
end of the wash process.
●
You can change each of the "Wash",
"Rinse" and "Spin" operation contents until
the end of the wash process. Press "Pause"
beforehand.
●
You cannot change the program.
■
After pressing "Start"
¥p¥~
}pììm®p
®Ô¡Ó
- 10 -
Service NA-F100A2.indd 10Service NA-F100A2.indd 10 4/26/2559 BE 11:50 AM4/26/2559 BE 11:50 AM