Panasonic NA-F115X1

Order No. PAPTH141101CE
Service Manual
Fully Automatic Washing Machine
Product Colour
Destination
Stainless Colour (L)
Silver (S)
White (W)
Thailand, Malaysia
Singapore (Local)
Singapore (Export)
Vietnam
NA-F135X1
NA-F115X1
NA-F135A1
NA-F125A1
NA-F115A1
The service information is designed for experienced repair technicians only and is not designed for use by the general
public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting
to service a product. Products powered by electricity should be serviced or repaired only by experienced professional
technicians. Any attempt to service or repair the product or products dealt within this service information by anyone
else could result in serious injury or death.
WARNING
IMPORTANT SAFETY NOTICE
There are special components used in this equipment which are important for safety. These parts are marked by
in the Schematic Diagrams, Circuit Board Diagrams, Exploded Views and Replacement Parts List. It is essential that
thesecriticalpartsshouldbereplacedwithmanufacturer’sspeciedpartstopreventshock,reorotherhazards.Do
not modify the original design without permission of manufacturer.
© Panasonic Appliances (Thailand) Co., Ltd. 2014.
Allrightsreserved.Unauthorizedcopyingand
distribution is a violation of law.

Panasonic NA-F115X1 Specifications

General

Brand	Panasonic
Model	NA-F115X1
Category	Washer
Language	English

Summary

Repair Work Security and Safety

Safety Precautions for Repair Work

Essential safety guidelines and warnings for technicians performing repairs.

Installation Guide

Operation Panel Guide

Washing Process

Washing Options

ECONAVI Functionality

Explanation of the ECONAVI feature for automatic adjustment of wash time and water amount.

Maintenance Procedures

Service Test Modes

Test Mode Procedures A-E

Detailed steps for performing test procedures 0 through 3, covering buzzer, operation, and water detection.

Test Mode Procedures M-H

Instructions for test procedures 4 through 6, focusing on belt tension, error messages, and operation times.

Troubleshooting Common Issues

Time and Operation Problems

Troubleshooting for time indications and operation interruptions.

Supply, RinseSpin, and Other Issues

Addressing issues related to water supply, rinse/spin cycles, power, and program selection.

Error Code Reference

U-Error Indications and Solutions

Explanation of U-Error codes (U11-U99) and methods to resolve them.

H-Error Indications and Solutions

Explanation of H-Error codes (H01-H21) and methods to resolve them.

Component Disassembly

Controller Unit Disassembly Procedure

Panel Face B Disassembly Procedure

Parts Identification and Replacement

Part A: Exploded View and Parts List

Part B: Exploded View and Parts List

Part C: Exploded View and Parts List