Panasonic NB-H3203

EN21
English
Check the following before calling for
maintenance service.
Problems Cause and solution
Baking
failure
●
The power plug is not fully inserted.
➜
Insert the power plug completely into the socket.
●
Error encountered
➜
Consult the place of purchase or a Panasonic service
center
.
Odor
●
The baking time is too long.
➜
Power off your product, disconnect the power cord, and
remove any food that causes odors in the oven.
●
The enamel baking tray releases an odor or there is food
residue on the cooking rack.
➜
Clean the enamel baking tray and the cooking rack.
●
Confirm if there are any drippings of grease or crumbs in the
crumb tray.
➜
Clean the crumb tray.
Troubleshooting
Specifications
●
After the power plug is inserted into the socket, the standby power is 0 W.
Power supply See the label on the back of appliance
Power consumption 1500 W
Capacity 32 L
Cavity temperature
Setup value: 70 - 230 °C (tolerance: ± 30 ºC)
Setting: When heating the upper and lower heaters,
make sure that their temperatures are the same.
Automatic thermolator
Upper and lower heaters
adjustable thermostat
Upper and lower heaters
1500 W
Fermentation: fixed
thermostat
Upper heater 750 W
Timer 120 minutes / Stay On Lower heater 750 W
Net weight (approx.) 9.7 k
g
Power cord length 1.0 m
External dimension Width: 52.7 cm Depth: 39.2 cm Height: 34.3 cm
Inner chamber Width: 38.0 cm Depth: 30.0 cm Height: 28.5 cm
Enamel baking tray
(internal dimension)
Width: 34.7 cm Depth: 25.4 cm Height: 2.0 cm
Size (approx.)
Function switching (approx.)