– 48 – – 49 –
Cleaning Setting (continued)
F2. System Cleaning
The first stage of this program cleans the system with a citric acid solution. The second stage runs water through
the system to rinse the pipes.
Notes:
1. When " " icon is displayed, run the ‘system cleaning’ program.
2. If the system cleaning program is not used regularly, the pipe will get blocked and the steaming performance
will be less effective.
3. Do not remove the drip tray during the system cleaning program.
4. Empty the drip tray and rinse with running tap water after the program has finished.
1
Make a solution of 16
g
citric acid and 200
g
of water, add the solution to
the water tank. Ensure drip tray is empty.
2
Tap once.
3
Turn the Dial to select F2. System Cleaning.
4
Press the Dial to confirm the selection.
5
Press the Dial to start.
The program will run for approx. 29 minutes.
6
After the program has paused, empty the drip tray and fill the water tank
with water (to max level).
7
Press the Dial to start.
The program will run for approx. 1 minute. Empty the drip tray after the program has finished.
F3. Deodorization
This feature is recommended for eliminating any odours from the oven.
1
Tap once.
2
Turn the Dial to select F3. Deodorization.
3
Press the Dial to confirm the selection.
4
Press the Dial to start.
The program time appears in the display window and begins to count down. The program will
run for 20 minutes.
Cleaning Setting (continued)
To Next Page
Loading...
