Panasonic NR-B29SG2 - Frequently Asked Questions (FAQs); Common Operational Sounds and Issues; Condensation, Panel, and Alarm Issues; LED Light and Door Alarm Troubleshooting

18
7.1.5. Drink Cool Mode
7.1.6. Screen Saver Mode
Features :
• Drinks can be cooled quickly in the FC.
• This mode has a timer function, and can be set to beep when the timer reaches 5, 10, 15, 20,
25 or 30 minutes.
• Remove the bottles when the beep is heard. If bottles are left in the freezer for a long time,
their contents could freeze and the bottles might break.
Settings :
1. Press (lower) button for 5 seconds.
2. [dc] is displayed on the FC temperature display and [05] flashes on the PC temperature
display.
3. Press (upper) to adjust the time (05-10-15-20-25-30 minutes).
4. The selected time flashes on the display 3 times and a beep will be heard.
5. Countdown by minutes starts from the set time, and the remaining time flashes on the dis-
play.
• To release Drink Cool Mode, press (lower) button for 5 seconds.
• When the set time comes, a beep will be heard, and both of the display indication
(Example: [00] and [dc]) flash until you press (lower).
Notes:
• When using this mode, check the temperature of the bottles regularly.
• When the bottles have cooled sufficiently, remove them from the FC.
Features :
• While setting this mode, the backlight of the display can be turned off to save energy.
Settings :
1. Press for 3 seconds to set the automatic Screen Saver function.
2. If no operation is performed for 5 seconds and any door is not opened, the backlight of
the display is turned off with all other marks and characters remaining on the display.
• The selected modes and functions are maintained.
• To set the automatic Screen Saver to off and keep the backlight of the display on, press
for 3 seconds.
Notes:
• When the automatic Screen Saver function is set to on and the display backlight is turned off
for a while, the display backlight will be turned on again and the set functions are indicated
on the display, if any button is pressed or any door is opened.
• When the Screen Saver and Child Lock are set to on, the Screen Saver is activated.
Therefore, while both of the functions are activated, the display backlight will be turned on
again when any button is pressed or any door is opened.