43
6. Take out the fan motor holder and remove the fan motor
from it’s place.
7. Cut off the pink connector socket coming with the spare
part.
8. Place the new Fan motor and screw the fan motor to its
place.
9. Pick up the black cables coming from connectors.
10. Place the lead wire (L) to be connected and the spare
(LS) lead wire in the grooves of part C. Head of lead wire
and of spare parts should protrude for approx. 2 - 3 cm
beyond U-CONNECTOR. This is to prevent the lead wire
from coming off.
To Next Page
Loading...
