EasyManua.ls Logo

Panasonic NU-SC300B - Steam Convection with Preheat; Initiating Steam Convection Preheat; Setting Preheat Temperature; Cooking After Steam Convection Preheat

Panasonic NU-SC300B
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- Eng-20 -
English
Steam Convection Setting
(continued)
When cooking with Preheat:
ò
Select Steam Conv. mode
by
using the slider bar or press
/ pad
. (With Preheat)
Note: Fill the tank with water be-
fore using.
ù
Press Set pad to set Steam
Conv
.
mode. (With Preheat)
ä
Set desired cooking temperature
by using the slider bar or press
/ pad.
(Temperatures range are 140 °C,
190 °C to 230 °C. Default tempera-
ture is 190 °C.)
Example: 230 °C
ë
Press Start pad to preheat.
You can change the desired
temperature by using the slider bar or
press
/ pad during preheating.
ö
After preheating, the oven will
beep three times
and the icon
” appears to inform preheat
is done.
Open the door and
place metal tray with food
in the upper and lower shelf
position quickly.
ü
Set desired cooking time by using
the slider bar or press
/ pad.
(Maximum setting time is 1 hour.)
Example: 5 minutes
Å
Press Start pad. The cooking
time in the display window will
count down.
You can change the cooking time while
cooking. Using the slider bar or press
/ pad can increase or decrease the
cooking time in 1 minute increments (up
to 10 minutes).
F0003CE30HP_eng.indd 20F0003CE30HP_eng.indd 20 2018/8/20 17:59:472018/8/20 17:59:47

Related product manuals