- Eng-8 -
English
Feature Diagram
(continued)
Note: The above illustration is for reference only.
Control Panel
Water Outlet
Drip tray
1. Take drip tray out from package and insert it to oven
legs according to figure 1.
2. Before using the oven, the drip tray must be fitted as
it collects excess water during cooking, otherwise the
cooking program cannot be performed.
3. The drip tray should be removed and cleaned on a
regular basis.
4. To remove the drip tray, hold with both hands and gently
ease forward, removed the cover (figure 2). Wash in
warm soapy water. Re-position the drip tray by clicking
back onto the legs.
5. DO NOT USE A DISHWASHER TO CLEAN THE DRIP
TRAY.
Note: When remove the drip tray, several drops may
fl ow from the water outlet of bottom cavity. You
can use soft cloth to wipe dry the water around
cavity after the oven cavity cooling down fi rst,
then remove drip tray.
Water Tank’s Installation / Removal:
Installation:
Hold the water tank horizontally, aligning the
bayonet and gently insert it to the bottom.
Removal:
After removing the drip tray, hold the bayonet
with both hands and pull out gently.
Identifi cation
Plate
Air Outlet
fi gure 2
fi gure 1
Air Inlet
F0003CE30HP_eng.indd 8F0003CE30HP_eng.indd 8 2018/8/20 17:59:042018/8/20 17:59:04
To Next Page
Loading...
